A Much Better Refrigerant For Air Conditioners And The Environment

A lot of air-conditioners and heat pumps sold around the globe utilize a refrigerant called R-22. Emissions of R-22 are thought about by some experts to be a considerable part of depleting the ozone layer that protects animals and people from damaging rays from the sun.

Families now have the option to request for an air-conditioner or heatpump that utilizes a more effective and ecologically friendlier refrigerant called 410A or R-410 when buying a brand-new system for their house.

It’s Environmentally Friendlier. If your system ever leaks, the escaping refrigerant will not contribute to ozone deficiency! Why can’t R-410A affect the ozone layer? R-410A is not a CFC or an HCFC. It is called an HFC, or hydrofluorocarbon, and is made of fluorine, carbon, and hydrogen atoms. Because it has no chlorine, it will not pollute the ozone layer once it breaks down.

When your system needs to be repaired in a couple of years, you prevent the risk that R-22 could become expensive or hard to get. The old refrigerant R-22 will be phased out along with other ozone depleting chemicals, and both supply and demand of this chemical will be significantly impacted by approaching and current policies. By selecting an air conditioning unit or heatpump that utilizes R-410A, you will prevent the risk connected with buying a product that is destined to become outdated.

R-410A systems can be more dependable than R-22 systems. R-410A cooling and heatpump are today’s “state of the art” systems, and use the most recent innovations readily available for effective and dependable operation. The heart of every ac system or heatpump is the compressor, and newer systems are specifically designed to utilize R-410A refrigerant. R-410A can release and soak up heat more effectively than R-22 ever could, compressors with R-410A run cooler than R-22 systems, decreasing the risk of burnout due to overheating.

All of us know that the first thing “to go” on an a/c unit is the compressor. All air-conditioning systems utilize an oil that distributes through within the system to keep all of the parts well lubed, similar to the engine of your car or truck. R-22 a/c utilize an oil called “mineral oil” that has been used for years. R-410A a/c utilize newer synthetic lubricants that are normally more soluble with the R-410A than the old mineral oils are with the older R-22 refrigerants. This indicates the synthetic lubricants and R-410A can mix and circulate more effectively to keep the compressor and other moving parts lubed, decreasing wear and extending their life. Also, simply as numerous brand-new cars and trucks utilize synthetic oils due to the fact that they are less likely to break down under high tension and heat, the brand-new synthetic oils used in R-410A ac system are less likely to break down under severe conditions.

R-410A provides some fantastic advantages, but it needed the manufacturers of a/c to upgrade their products to make the most of the properties of the refrigerant. The reason a refrigerant works is due to the fact that it captures the heat from one location, and then gives up the heat elsewhere. R-410A captures heat and then gives it up better than R-22 did, so manufacturers have discovered that they need less refrigerant in an R-410A ac system than they required in an R-22 ac system. Because there’s less refrigerant, they need less copper tubing, and often can utilize a smaller compressor. The bad news was that R-410A could not be used in a/c that were made to utilize R-22, but the advantages for brand-new a/c were undue to miss.

It’s obvious that a/c produced for using R-410A are more effective, more dependable, and might even be less pricey then the older systems that still utilize R-22. Compare the SEER or EER scores and the ENERGY STAR rating to be sure.

For more info give this company a call for a brand new ac system or these services:

 

 

Summary

R-410A can soak up and give of heat more effectively than R-22 ever could, compressors with R-410A run cooler than R-22 systems, decreasing the risk of burnout due to overheating.

R-410A air conditioners utilize newer synthetic lubricants that are normally more soluble with the R-410A than the old mineral oils are with the older R-22 refrigerants. Just as numerous brand-new cars and trucks utilize synthetic oils due to the fact that they are less likely to break down under high tension and heat, the brand-new synthetic oils used in R-410A air conditioners are less likely to break down under severe conditions.

R-410A catches heat and then gives it up better than R-22 did, so manufacturers have discovered that they need less refrigerant in an R-410A air conditioner than they required in an R-22 air conditioner. The bad news was that R-410A could not be used in air conditioners that were made to utilize R-22, but the advantages for brand-new air conditioners were too great to pass up.

Related Post

-